Our Products


Flexi-Bound : Flexible Cementitious Waterproofing Membrane

General :-

FLEXI-BOUND
is highly flexible, thixotropic two pack material consisting of high solids polymer with modified cement bound mineral powder. Flexi-Bound is paint able and has high adhesion with concrete / masonry surfaces. The Coating of Flexi Bound possesses high flexural and tensile strength and thus elastic in nature. Flexi Bound is free form chlorides and any other corrosive substances.

Technical Data :-  
Appearance : Liquid / White in color, Power / Grey in color
Tensile Strength : 17 kg/sq.cm.
Elongation : 185 % (non reinforced)
Stain Resistance : Excellent
Drying Time (Initial) : Less than 4 Hour
                      (Complete) : 48-72 hours depends upon ambient temp. and substrate
Resistance to Water Pressure : Up to 7 Bar
Crack Bridging Capacity : 1.2 mm at 1 mm thickness

Fields of Application :-
Flexi-Bond is used for:
* Sealing of strained basements walls
* Waterproofing systems for water tanks
* Waterproofing systems for high water heads
* Sealing and protection of bridge decks, splashing zones, tunnels, cooling towers, balconies, etc.
* Waterproofing proofing of terrace, roof lawn,, parking decks, ramp etc.
* As anti-carbonation coating in new and repair protection system

Properties: -
 
* High Water Resistance * No water curing required
* Breathable membrane * Easy to apply
* Excellent adhesion to Brick work, concrete / masonry, other cement bound surfaces * U.V. resistant
* Easy to use
* Seamless, non-toxic * Highly Flexible
* U.V. resistance * For internal as well as External purpose

Surface Preparations :-
Clean thee base thoroughly by wire brush and remove the loose material, dust, grease, oil or other foreign particles. Cracks must be opened by means of cutter / manually. Clean the surface then by water to remove all dust and saturate the base by water and dampen the surface, remove the excess water. Fill the crack / honey comb with Crack bound / or repair mortar composed of Repair Bound to be filled directly to the sound groove / honey comb substrate.

Mixing & Application Procedure:-
Flexi Bound consists of a liquid component and a power component. Take a clean container add it Flexi Bound Liquid add to it water and then slowly start adding flexi Bound power component in the ratios given below. Mix thoroughly for 3-4 minutes and do not mix materials that can be used in 15 minutes. At 25ºC the working time is 15 minutes. Flexi Bound is applied in two coats at 1.5mm thickness. For hair line cracks prepare the surface as described above and then apply two coats of Flexi Bound over with a width of 6-8 inch. The mixed material can be applied by trowel or brush before application the surface should be moist not wet remove excess of water if any. The interval between two coats 3-4 hours

Recommended Mixing Ratios for various applications

TYPE OF APPLICATION MIXING RATIOS CONSUMPTION

Primer Coat
(Must in any Application)
1ST COAT

1 KG Flexi Bound Liquid :
2 KG Water :
6 KG Flexi Bound Powder

Approx 90 Sq.Ft. Per Coat
Water Proofing of new structure 2ND Coat

1 KG Flexi Bound Liquid :
1 KG Water :
6 KG Flexi Bound Powder

Approx 60 Sq.Ft. Per Coat
Water Proofing of old structure 2ND Coat 2 Flexi Bound Liquid :
1 KG Water :
9 KG Flexi Bound Powder
Approx 45-50 Sq.Ft. Per Coat
Crack Resistant Coating Over Cracks 1 KG Flexi Bound Liquid :
1 KG Flexi Bound Powder
 
* THE THICKNESS OF COATING SHOULD BE 1.5 MM IN 2 COATS


SHELF LIFE AND STORAGE :
To be stored in original packed containers, protected from direct sunlight & frost. Flexi Bound is non toxic & non flammable. Shelf Life 1 year when stored under conditions.

ENVIRONMENTAL AND SAFETY PRECAUTIONS:-
Flexibound liquid contain polymers & powder is alkaline in nature.
Avoid breathing vapors or mist or dust.  Avoid direct contact with eyes or skin, in case eye contact splash water & immediate contact nearest physician

Swimming Pool, Dams Water Proofing | RHINO-Coat | Steelbound Crystallization | Flexi-Bound | Repairbound | Crackbound PU | Super plasticizer

...............................................................................................................................................................................................................................................................
Designed & Hosted by : MID   Promoted by : GID